This bolt lock is used for the mechanical locking of switches, earthing switches.

An enclosure can be added, with the switch’s status being changed by the bolt when the key is turned.
The bolt’s position (in or out) determines the key status (trapped or free).

Boltlocks can be fixed either from cylinder side or from the opposite side of the cylinder.

For fixing, we strongly advise not to « re-drill » the fixing holes and to use fixing elements not exceeding Ø 5mm and with maximum torque value of 1,2 Nm.

Material : A6061-T6 colorless anodising, PA66 50% glass fiber (lock body) and stainless steel

Bolt diameter : 10mm

Cylinder profile :
Flat key (Réf. RVE11CEL3000)
Star key (Réf. PVE11CPS3000)

Options :
Bolt length = 35mm
Diameter = 15m
Special bolt on demand
Switch= Rating at 250V CA (*Nominal 6A; Thermal 7,5A), wire section 0,5mm², length 50cm, Protection IP67

Key position defines the position of the bolt. The key rotation moves the bolt.
With switch option : The switch is activated by the bolt