You're here » Home / Products : Latch Locks / Latch lock single key entry NXOL
 Latch lock single key entry --------------
Ref : NX0L85
 Demonstration NXOL
To take off the latch,you have to insert and operate the key into the lock. As long as the latch is out, key remains trapped.
 Demonstration NX1LT+NC2
To open the access, operator have to take off the key, operate the latch for open the contacts.
|
|
| ::. PRODUCT DESCRIPTION : |
This lock allows the locking of accesses such as sliding doors, caps, casings and other guards.
Made up of stainless steel to resist to aggressive or corrosive environments.
The NXOL lock equipped with the optional Chain Key can support a high degree of misalignment. |
| ::. CHARACTERISTICS : |
Material : 304 Stainless steel
Temperature : -25° to 125°C
Finish : Red polyester paint (RAL 3000)
Options:
>
400°C, not painted, without contacts or flip cap
> Emergency release system with pushbutton
> Chain key
> 180 mm Latch
> Latch without consignment key (LT)
>
Latch with consignment key (LTC)
> Electrical contact (NC2)
|
| ::. SAFETY LOGIC : |
Authorisation key free, latch trapped. |
|
| ::. OTHER EXISTING CONFIGURATIONS : |
NX1LTC : Latch lock with consignment key
Operator have to take off the key before access to the dangerous area.
Consignment key trapped - latch trapped.
NXL85+NC2 : Access lock with 85mm latch and switch NC2
The switch status is directly link with the latch operation
NXOOL85 : Access locking with 2 key entry and 85mm latch (release of 2 keys)
2 authorisation keys free, Latch trapped.
NXO1L180 : Access locking with 2 key entry and 180mm latch (Exchange function)
1 authorisation key free, 1 consignment key trapped, latch trapped |
|
